Address:Home > Products > SKC(USA) >  Area Air Sampling Pumps

Area Air Sampling Pumps

From:   Author:   Date:2011-11-03  

Leland Legacy

QuickTake 30


Flow Ranges

5 to 15

10 to 30 up to 30; 
2 to 13 for sonic flow
Constant Flow Yes Yes No
 Back Pressure
(inches water)
Up to 12 at 10 L  Up to 15 at 30 L  Dependent on critical orifice
 Programmable  Yes  Yes  No
 Weight in Pounds (kilograms)


 Power  Li-Ion battery  Li-Ion Battery or AC Adapter  Line operation only
 Case  Anti-static thermoplastic with soft rubber overmolding  ABS plastic  Housing for protected environment sampling only
 CE marked  Yes   No   No


Area Sampling Pumps

1 L/min Grab Air Sample Pump (1 L/min)
Designed to fill air sample bags. Collects approximately 1000-liter volume on one 9-volt battery


5 to 15 L/min SKC – Leland Legacy Area Sampling Pump
 SKC Leland Legacy Area Sampling Pump. Achieve flow rates that you couldn’t achieve before.
Achieve flow rates that you couldn't reach before when using a personal sample pump. The Leland Legacy provides high flow pump power in a compact, portable sampler. High flows from 5 to 15 L/min or no problem for the Leland Legacy Personal Sampler.
The patented internal flow sensor measures flow directly and acts as a secondary standard to constantly maintain a set flow. The set flow is achieved immediately at start-up and is automatically corrected for variations in temperature and atmospheric pressure. Simply key in sample time and flow rate using the built-in three-button keypad. Real-time parameters are available at the touch of a button.
Use Leland Legacy with your PC and DataTrac software to create complete running sequences, download sampling and calibration data, and generate exposure and calibration reports.
• Long run time, 24hours plus
• Economical and time saving
• Simple and easy operation
• Complete sample integrity
• Rugged RFI shielded case
• CE approved
• Ideal for sampling asbestos and lead to meet NIOSH methods
• Ideal for emergency response
• Flexible programming
• Designed for indoor environments
• Downloadable history


10 to 30 L/min QuickTake® 30 Pump (10 to 30 L/min)
Designed for use with BioStage viable cascade impactor, VersaTrap spore trap cassettes, asbestos filters, or impactors. Includes keypad programmable timer, display of sample time, and end-of-cycle alarms. Accessories include mounting bracket for viable cascade impactors, sampling wand for spore trap samples in ductwork, and tripod stand.
Flow Ranges: 10 mL/min to 30 L/min
Flow adjusted:Push button
Weight: 72 ounces
Back Pressure: 15" at 30000 mL/min
Battery Type: Li-ion battery
Operating Temp: 32 to 113°F (0 to 45°C)
Listings: N/A
Vac-u-Go Vacuum Pump (Sonic flow applications)
Designed for use with SKC BioSampler and other applications that require sonic flow. Includes protective housing with vacuum gauge and valve
Performance Profile
Flow range: Non compensated airflow up to 30 L/min
Sonic flow with BioSampler (acts as a critical orifice) is approximately 12.5 L/min
Motor: Oil-less rotary vane
Vane life: Approximately 6000 to 27,000 hrs depending on application
Power: Line power only
115V, AC, 60 Hz (Cat. No. 228-9605)
230V, AC, 50 Hz (Cat. No. 228-9605B)
Operating temperature range: 32 to 104 F (0 to 40 C)
Size: 5.5 x 10.5 x 6.5 ins. (13.9 x 26.7 x 16.5 cm)
Weight: 12 lbs (5.4 kg)
Standards: None. Pump is not intrinsically safe.